HomeMy WebLinkAbout2019-02-06 Firing Range Work Permit - DLI Inspection Report M DEPARTMENT OF ; ;:'r•F1
a• •a
LABOR AND INDUSTRY
: V ,.
❑ tip
Inspection Report
Name: MCF/ OAK PARK HIEGHTS FIRING RANGE Project Number: BLD1812-00033
TROLLY Ft HVAC REPLACEMENT
Project location/address: 5329 N Osgood Ave, Oak Park Heights, Washington County, MN, 55082
Contractor: Northland Mechanical Contractors Inc Phone:
Project Contact: Northland Mechanical Contractors Phone:
Inc
Scheduled for 2/6/2019 Time: 7:00 am
Inspector Report
Inspection Type: Mechanical Result: Pass with Conditions
Specify Work Inspected and Tested:
Inspected (partial) replacement of ventilation system for prison firing range. Supply trunk
within the firing range is completed to the diffusers. Dampers in place. Contractor stated that
stops at louvers will be removed. This is acceptable. Support of ductwork and sealing of joints
is acceptable.
Reviewed location of new air handling equipment, route of remaining ductwork and
penetrations in walls. All were found to be acceptable.
Will need to call for another inspection when rough-in work is completed.
Louvers behind firing line must be set for 30 degree down angle, per plan. Verify at following
inspections.
Inspected By: Thomas Gray Region:
Date: 2/6/2019 Departed:
Phone: (651) 402-0756 Emai : thomas.gray@state.mn.us
443 Lafayette Road N, St. Paul, MN 55155• (651) 284-5005 • www.dli.mn.gov