HomeMy WebLinkAboutLock Out Tool Kit Instruction Big Easy The BlmgEasy
1A
TM
4
Lockout Tool Kit INSTRUCTIONS
The Big Easy Tool
lA - (Plastic Wedge) - Insert the plastic wedge at the uppermost rear corner of the front door
frame. Each vehicle will be a little different but start the wedge into the door gap and use the r
wedge to pry out the door frame enough to see where the weatherstrip contacts the body. Tapping
the wedge with the heel of the hand, carefully guide the wedge between the weatherstrip and
body. Continue inserting the wedge until there is enough gap to easily insert the BigEasy Tool. B Do Infiatable
Easy Wedge.
1 B - (Optional Inflatable Easy Wedge) - LUBRICATE THE EASY WEDGE WITH WINDEX 71
g uppermost _........_.
OR MILD DETERGENT. Insert the Inflatable Easy Wedge at the a ermost rear corner of
the door frame. The Easy Wedge should be inserted 2 /3rds into the car. If obstructed by
weatherstrip a plastic or wood wedge may assist. With experience the Easy Wedge will enter
most cars without assistance. Inflate the wedge to allow insertion of the BigEasy.
2- Insert the BigEasy Tool into the vehicle interior and use the tip of the Tool to manipulate the
electric lock button, the sliding lock button, or the door opening handle. If the bend in the
BigEasy Tool is not sufficient, remove the Tool and adjust the bend to the required configuration
for the vehicle at hand.
Note: The BigEasy Tool can often be used to tilt the inside rearview mirror to view a lock slide
or door handle not directly visible from the working position.
S
1
t Paint Protector reduces friction between the
-"' car door and the BigEasy so the powder
SureGrip Lock Knob Lifter coating on the BigEasy does not rub off.
1- Insert the plastic wedge or N
optional Inflatable Easy Wedge
into the uppermost rear corner of
the front door frame just enough
to relieve the pressure between
the weatherstrip and body.
2- Insert the SureGrip strip into the interior
of the vehicle and slide it down to the 2 r-
vertical lock knob. Hold one leg of the
SureGrip strip with each hand. Push and
pull opposite legs to "steer" the SureGrip
as you lower it onto the vertical lock knob.
3- After the SureGrip strip is positioned on
the vertical lock knob, pull rearward until See a video of the BigEasy" in use at Additional Instructions On
snug to grip the knob and then add a slight Traduccion al Espanol Reverse
upward pull to lift the vertical lock knob. www'stec kmfg -com Optional Accessories Side